UGREEN USB 2.0 A Male to B Male Active Printer Cable

Description

Ugreen Active USB Printer Cable is a USB-A to USB-B connection for a compatible printer.

Check for the square-style USB-B socket on the printer before choosing the cable. Printer recognition and printing functions also depend on the computer’s appropriate driver or printing software.

Key Features

• Host connector: USB-A male.
• Device connector: USB-B male.
• USB standard: USB 2.0.
• Maximum data rate: 480 Mbps.
• Cable type: Active.
• Shielding: Foil and braid.

Specifications

Compatibility and Usage

Compare the connector shapes with the computer and peripheral before connecting them. Insert each plug straight and keep the cable or adapter supported so it does not pull sideways on a socket. For a removable storage connection, wait until the host recognises the device before starting a file transfer.

The connection works within the capabilities of the complete setup. A faster cable or adapter does not upgrade a slower computer port or peripheral. If the connected equipment needs its own power supply or software, continue to use those as required; the USB link is only one part of the system.

Plan the connection around the equipment you actually use. A reachable port is useful for accessories that are removed often, while a fixed cable route suits devices that stay in place. Leave room to access the plug later and avoid pressing connectors against the rear of a desk or cabinet.

Frequently Asked Questions

What determines the actual transfer speed?

The host port, cable path, peripheral and workload all matter. The listed USB rate describes an interface limit, while real file-copy performance also depends on storage speed and file size.

Will the connection replace a device driver?

No. A printer, specialist peripheral or other device may still require its normal software. Check the device maker’s setup instructions if the computer does not recognise it.

How should I disconnect attached storage?

Finish the transfer and use the operating system’s eject function where available. Then remove the plug by its housing rather than pulling on the cable itself.

What is useful to check before a permanent installation?

Test the actual peripheral with the host and the complete cable path first. Check recognition, the intended operation and any power requirements before routing the connection behind furniture or somewhere difficult to reach.