Ugreen USB-C Audio Cable 3.5mm M/M Aluminum Shell 30633

Description

Ugreen 30633 is a USB-C to 3.5 mm analogue audio cable for specifically compatible devices.

This cable requires a source that outputs analogue audio through USB-C. Many USB-C devices require a digital audio adapter instead, so verify the exact device’s audio support first.

Key Features

• Source connector: USB-C male.
• Audio connector: 3.5 mm male.
• Signal requirement: USB-C analogue audio.
• Digital converter: No DAC.
• Housing: Aluminium.

Specifications

Compatibility and Usage

Check the audio connector type and signal requirement at both ends before connecting the accessory. Digital and analogue audio use different connection methods, even where a plug looks familiar. Insert the connectors fully, select the appropriate audio output on the source and begin at a comfortable volume.

Use the connection with equipment that supports the stated audio path. A connector accessory does not give a source an audio function it lacks. Keep the cable relaxed near the plugs and confirm the receiver, headphones or speaker is set to the matching input before increasing volume.

Before arranging a permanent audio setup, test the source and receiving device together with the selected cable or adapter. Keep connectors accessible so they can be removed by their housings. Allow a gentle cable route, especially near a portable device that may be picked up during listening.

Frequently Asked Questions

Does a matching plug guarantee audio support?

No. The source must provide the required signal and the receiving equipment must accept it. Check the stated digital or analogue requirement as well as connector shape.

What should I check if there is no sound?

Confirm the source output, receiving input and volume settings. Check that the connectors are seated properly and that the equipment supports the accessory’s specified audio method.

Will the cable add audio features to a device?

No. Features depend on the connected equipment and supported signal path. Choose the accessory for the connection described rather than assuming additional microphone or surround capabilities.

Should I test the source and receiver together first?

Yes. Use the intended equipment and settings before arranging the cable permanently. Confirm sound reaches the correct destination at a comfortable volume and that the connector arrangement suits the actual digital or analogue signal path.