KINGLEEN U+C CHARGER 25W PD+USB 3.0 E33

Description

Kingleen E33 is a dual-port wall charger with PD and PPS support.

PPS support matters for devices that use an adjustable charging profile. The device must also support that mode; a USB-C connector alone does not establish PPS compatibility.

Key Features

• Ports: USB-A and USB-C.
• Charging support: PD.
• Adjustable-voltage support: PPS.
• Input: 100–240 V AC.
• Mains frequency: 50–60 Hz.

Specifications

Compatibility and Usage

Use a charging cable that matches the selected output port and the device. Check the charger’s electrical input and plug fit before connecting it to a wall socket. Place the device on a stable surface with enough cable slack, and keep the charger accessible rather than covering it during operation.

Charging power is negotiated between compatible equipment. Compare the output for the chosen port with the device’s charging requirement, especially when charging a laptop. On a multi-port model, connecting another device can change the power allocation. A total output figure should not be treated as an identical rating for every socket.

For a regular charging point, consider which devices are usually connected together. Keep the most suitable cable beside the charger and check the device’s charging indicator after connection. This helps confirm the setup is working before leaving a phone, tablet or compatible laptop to replenish its battery.

Frequently Asked Questions

Will every device charge at the stated maximum?

No. The device, charging protocol and cable determine the accepted power. A smaller device may draw much less, and charging often slows as its battery approaches full.

Which cable should I use?

Choose one with matching connectors and sufficient power capability for the intended device. The cable must also support any charging mode required by the device and selected charger output.

How do I choose the right output?

Compare the port label with the device’s requirements. Where different port types or ratings are provided, use the connection that supports the intended charging profile and available power.

How can I check that the charging setup is working?

After connecting the device, look for its normal charging indicator. If it does not appear, check the wall connection, chosen output and cable seating, then confirm that the device and charger support a compatible profile.