KINGLEEN USB TO IPHONE 3 METER DATA CABLE K35

Description

Kingleen K35 is a long USB-A to Lightning data and charging cable.

The three metre length gives more placement freedom than a short charging lead. Route spare cable away from chair wheels and foot traffic while keeping the plugs free of strain.

Key Features

• Source connector: USB-A.
• Device connector: Lightning.
• Length: 3 metres.
• Maximum current: 2.4 A.
• Colour: White.

Specifications

Compatibility and Usage

Connect the USB-A end to a suitable USB-A charger or computer, and the Lightning end to the compatible Apple device. Check the actual device socket first because Apple products use different connectors across generations. The rectangular USB-A plug and the Lightning plug serve different ends of the connection.

For a computer data connection, approve any device trust prompt and use the appropriate supported software. For charging, match the power source to the device and cable. Leave enough reach for the phone or accessory to rest on a stable surface without being pulled towards the computer or wall socket.

This cable arrangement is useful when you already have a USB-A power adapter or computer connection. The cable does not change the charger into a USB-C PD source. Check the available length, keep the route clear of sharp edges and use the connector housing when unplugging either end.

Frequently Asked Questions

Does a higher cable rating make every iPhone charge faster?

No. The device accepts the charging profile it supports. The charger capability, battery level and operating conditions also affect the actual charging rate.

Can I connect the Lightning end to a USB-C phone?

No. These connectors have different shapes. Select a cable with the device-end plug that matches the phone instead of trying to force the connection.

How should I handle the cable each day?

Hold the plug when disconnecting and avoid bending the cable sharply at the connector. Store it in a loose coil with the ends kept clean and dry.

What should I check when using a phone case?

Make sure the connector can seat fully through the case opening. Keep the cable aligned with the phone port and leave enough slack to place the phone down without a sideways pull on its socket.